電氣成套使用中欠缺整體規劃與標準如何？您可以對比一下，看自身在應用的電器設備存不會有這種須整頓的事項，下麵小編為您講解。
What about the lack of overall planning and standards in the use of electrical complete sets? You can compare the electrical equipment you are using to see whether there is such a thing that needs to be rectified. The following sections will explain it for you.
1、欠缺控製係統設計與整體規劃
1. Lack of control system design and overall planning
①自動控製係統構造：集中化與遍布，傳動係統與操縱，主控芯片與輔助，網絡架構，櫃身合理布局等層麵均未做了整體的考慮到。
① The structure of automatic control system: centralization and pervasiveness, transmission system and control, master control chip and auxiliary, network architecture, reasonable cabinet layout and other aspects have not been considered as a whole.
②網絡架構：沒有根據所明確的自動控製係統的構造，整體規劃控製係統係統總線及通信網絡，明確互聯網的構造，傳輸方式，走線方式及走線間距。
② Network architecture: The control system bus and communication network were not planned as a whole according to the clear structure of the automatic control system, and the structure, transmission mode, routing mode and routing spacing of the Internet were defined.
③開關電源構造：沒有根據所明確的自動控製係統的構造，數據管理平台的開關電源分派，沒有開關電源歸類按段，及其有關的維護，沒有浪湧保護器及過電流量維護。
③ Structure of switching power supply: there is no switching power supply distribution of data management platform, no switching power supply classification by segment, and its related maintenance, no surge protector and over-current maintenance according to the specified structure of automatic control system.
④接地保護：沒有根據明確的自動控製係統構造、網絡架構、開關電源構造明確係統軟件接地裝置構造，沒有歸類，按段，分層次接地裝置的設計方案。
④ Grounding protection: the structure of the system software grounding device is not defined according to the clear structure of the automatic control system, network architecture and switching power supply, and the design scheme of the grounding device is not classified by sections and levels.
2、欠缺標準與規範，及統一的管理方法
2. Lack of standards and norms, and unified management methods
①沒有統一的設計規範。
① There is no uniform design specification.
②沒有標準的製圖標準。
② There is no standard drafting standard.
③沒有安裝成套設備技術標準。
③ There is no technical standard for installing the complete equipment.
④從係統軟件方麵，電子器件方麵，各種各樣型號選擇都欠缺恰當與精準的測算，片麵性隨機性大。
④ In terms of system software and electronic components, all kinds of model choices lack proper and accurate measurement, and are highly one-sided and random.
⑤持續改善更無從說起。
⑤ There is no way to talk about continuous improvement.
The lack of overall planning and standard related content in the use of electrical complete sets will be explained here. If you have any ideas about this, please come to our website https://www.zhengyangdl.com Consult!
TEL:0531-69922480
EMAIL:jntyhc@163.com
公司地址：濟南市槐蔭區經十西路3788號
備案號：
首頁
產品
電話
置頂