山東 機箱機櫃在冬天一樣可以運作，因為 它承載的是電子產 品，電子產 品在運轉的過程中就會 產 生大量的熱量，如果我們 不及時散熱的話，就會 出現一係列的問題。下麵就跟著小編一起去看一看這款山東 機箱機櫃吧！

　　Shandong chassis and cabinets can also operate in winter because they carry electronic products. Electronic products generate a large amount of heat during operation. If we do not dissipate heat in a timely manner, a series of problems will occur. Let's follow the editor to take a look at this Shandong chassis cabinet!

　　山東 機箱機櫃在散熱係統中風扇特別適用於 經濟的排出高熱負載。隻有在櫃內 溫度高於 環境溫度時，使用風扇才是有效的。因為 電力機櫃中熱空氣比冷空氣輕，櫃內 空氣流向應當是由下往上，因此，通常情況下，應在櫃體 的前門或者側 壁板的下方作為 進氣口，上方作為 排氣口。如果工作現場的環境比較理想，沒有粉塵、油霧、水汽等影響電氣控製櫃內 的各元器件正常工作的，可采用進氣口裝風扇，排氣口有可能的話加裝一裝飾板，進氣口為 了美觀，可以在外麵加裝一風機裝飾板。

　　The fan in the Shandong chassis cabinet is particularly suitable for economically discharging high heat loads in the cooling system. The use of a fan is only effective when the temperature inside the cabinet is higher than the ambient temperature. Because hot air in the power cabinet is lighter than cold air, the air flow inside the cabinet should be from bottom to top. Therefore, in general, the front door or side wall panel of the cabinet should be used as the air inlet, and the top should be used as the exhaust outlet. If the working environment at the workplace is ideal and there is no dust, oil mist, water vapor, etc. that affect the normal operation of various components in the electrical control cabinet, a fan can be installed at the air inlet. If possible, a decorative panel can be added to the exhaust outlet. For the sake of aesthetics, a fan decorative panel can be installed outside the air inlet.

　　如果工作現場的環境不理想，含有粉塵、油霧、水汽等影響電氣控製櫃內 的各元器件正常工作的，那就應該在進氣口選用過濾風扇，在排氣口選用過濾柵，以防止粉塵、油霧、水汽等進入電氣控製櫃內 。

　　If the working environment at the workplace is not ideal and contains dust, oil mist, water vapor, etc. that affect the normal operation of various components in the electrical control cabinet, a filter fan should be selected at the inlet and a filter grille should be selected at the exhaust to prevent dust, oil mist, water vapor, etc. from entering the electrical control cabinet.

　　本文由 山東 機箱機櫃 友情奉獻.更多有關 的知識請點擊   https://www.zhengyangdl.com    真誠的態度.為 您提供為 的服務.更多有關 的知識我們 將會 陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Shandong chassis and cabinets. For more related knowledge, please click https://www.zhengyangdl.com Sincere attitude. We will provide you with comprehensive service. We will gradually contribute more relevant knowledge to everyone. Stay tuned